This standard selection of Servo-Worm Reducers are ideal for use in applications that demand high performance, precise positioning and repeatability. They were specifically developed for use with state-of-the-art servo electric motor technology, providing restricted integration of the motor to the machine. Angular backlash of significantly less than 1 arc-minutes is provided standard.

They are available in four sizes (50 mm to 100 mm center distance) with input speeds up to 5,000 rpm, reduction ratios from 4.75 to 52:1 and output torque capacities up to 885 lb.ft. A wide range of engine couplings and installation flanges are available for assembly to virtually all servo motors, and the hollow bore output can be utilized to mount output shafts, pinion shafts, or other drive elements.

Normal applications for these reducers include precision rotary axis drives, traveling gantries & columns, materials handling axis drives, zero-backlash axis drives and electronic line shafting. Industries served include Material Managing, Automation, Aerospace, Machine Tool and Robotics.
helical-worm servo gearmotors have a torque selection of 92 Nm to 520 Nm. As angular drives they are especially space-saving and decrease the expenditure for useful installation space.

The helical-worm servo gearmotors are designed so that they guarantee you a low-noise system environment. Moreover, these gearmotors offer you superb attenuation properties for the operation of your systems with low levels of vibration. This is certainly due to the longitudinal program of push on the insight shaft. This enables torque impulses to be prevented efficiently and for optimum results when it comes to running smoothness and noise reduction to be achieved.

Both the gear unit, and the synchronous servomotor are based on our modular program. This allows you to have completely individual configuration possibilities for each application. One factor is for certain – Our servo gearmotors are genuine specialists for very specific requirements.
Wormwheel gearboxes go by several names, including 90-degree gearboxes, right position gearboxes, swiftness reducers, worm gear reducers and worm drive gearboxes. Gear reduction boxes include a gear arrangement when a equipment in the type of a screw, also known as a worm, meshes with a worm gear. These gears are typically made from bronze and the worms are steel or stainless steel.

While worm gears are similar to a spur gear, the worm gearboxes are considerably smaller than other gear reduction boxes. A primary benefit of worm gear reducers is usually that they produce an output that is 90° from the insight and can be used to transmit higher torque or decrease rotational speed. Frequently, a worm gearbox offers right hand threads; to improve the direction of the output, a left-hand thread worm gearbox is necessary.
At times a motor’s capability may be limited to the point where it requires gearing. As servo producers develop better motors that can muscle applications through more difficult moves and generate higher torques and speeds, these motors need gearheads equivalent to the task.

To see similar worm drive servo items we provide click.