helical worm gear motor
Helical-worm gearmotors
Due to their design and from being combined with a helical equipment stage, the helical-worm gearmotors S..DR.. have especially high efficiency. They are also extremely low-noise and therefore avoid high sound emission levels.
Low-noise continuous operation: gear unit combination optimized with respect to efficiency
Do you anticipate a drive solution to impress you using its high level of efficiency and efficiency? In that case, we would recommend our high-quality helical-worm gearmotors EP to you. These could be implemented individually in the modular program. In this way, they offer you a massive range of sizes, gear ratios and electric motor sizes.
However, their greatest power is certainly their running smoothness and their extremely low noise development. A very important factor is certain – With the helical-worm gearmotors EP you are choosing a powerful drive solution which you will hardly even hear.
The overall concept also offers you a lot more practical product characteristics and benefits. These include the significantly higher efficiency of the helical-worm combinations as opposed to single helical-worm gear devices. This is one way you save extra energy in the operation of your systems and are able to noticeably reduce ongoing operating costs.
You will receive the low-noise helical-worm gearmotors EP. – to fit your person requirements – with a wide variety of AC motors. In addition, you can freely configure all of the relevant properties. In this way, you can effectively utilize all the benefits offered by this mixture of low-noise helical-worm equipment unit and performance-optimized motor. Even greater variance can be achieved because of the optional flange or foot-mounted style and by choosing between solid and hollow shaft.
Save money and time
By opting for one of our gearmotors, you already are saving time and money with this selection and task planning. It is because our modular system enables a multitude of combination options for gear systems and motors. You can consequently reduce operating costs, count on an extended service life and benefit from simplified maintenance that is characteristic of our brand.
Helical-worm gear units
Helical-worm combinations with significantly better efficiency than one helical-worm gear units
Very low-noise operation
Available variants:
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Ever-Power
More on helical-worm equipment units of series EP
AC motors
Combine the helical-worm gear unit with this AC motors:
Characteristics
Quiet and dependable transmission of torque
High overload capacity
Hardened steel worm gear and bronze alloy worm steering wheel provide exceptional sturdiness and lengthy service life.
Optional heavy duty bearings deliver high radial and axial load capacity
High strength cast iron housing (SK02050 – SK43125)
Lightweight, corrosion-resistant aluminum alloy housing (SK02040.1)
Application Specific Solutions
Fields of use
Intralogistics
Material handling
Presses
Version
Solid and Hollow shaft (keyed, shrink disc ) Designs
Available in footed, shaft install or flange mounted configurations
Right Angled gear units
Your advantages
Economical operation
Low noise
High permitted overhung loads
Helical-worm Gearmotor S Series
S series
Ever-Power helical-worm gear models are helical/helical-worm combinations, so they are more efficient than normal helical-worm equipment units. Due to their outstanding effectiveness, these drives can be utilized in every commercial sector and customized to individual torque and speed requirements. The decrease ratios afforded by the helical-worm equipment stage and the reduced noise levels during operation make these gearmotors ideal low-cost solutions for basic applications.
Available versions:
Foot-mounted or flange-mounted
B5 or B14 Flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disc, splined hollow shaft
Helical worm geared motors
Tough, compact, eye-catching!
Due to the unique mixture of optimized worm wheel material with unique lubricants, optimized form, this powerful motor achieves high degrees of effectiveness and torque. The housing machined on all sides enables diverse mounting options. Double chamber shaft seals are used as standard.
The low contour design helps it be suitable for implementing applications e.g. in the meals industry. The housing has no recesses, which simplifies cleaning – an especially essential feature for areas with stringent hygiene requirements.
Technical Data
Number of sizes:6
Power Range:0.12 – 7.5kW
Output torque range:50 – 1,300Nm
Ratio:3 – 3,400
Output option:output shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm, foot
Course 12 Helical and hardened and ground worm gears: Provides higher efficiencies and better torque capability in smaller sizes.
Multiple Input Options: Integral gear motors, inch or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Choices: Hollow bores and shrink disks for shaft mounting, inch and metric output shafts, installation pilots and flanges provide a wide variety of design solutions.
UNIBLOCK Housing: For maximum rigidity universal mounting on five sides or with a torque arm.
Sealed for Washdown: Retains contaminants and water away.
Worldwide Motor: Multiple leads and windings for worldwide multi volt/Hz requirements in addition modular design to accept brakes, encoders or forced cooling.
EP gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical correct angle worm geared motors arranged new standards for reliability, effectiveness and economic climate with unparalleled features which includes hollow shafts in the smallest sizes. An inverter friendly style offers easy integration at this point and a truly future proof solution. The EP gear engine offers total versatility in mounting choices includes shaft, base, face, and flange solutions. The motor terminal box can be mounted in substitute positions rotated in 90º steps around the motor frame providing for unparalleled integration opportunities.
EP gear motors comply with North American and International criteria, including NEMA, IEC, CSA, and CE, the EP series allows for worldwide acceptance, a genuine total option for our global clients.
Excellent protection of IP65 acc. to IEC 529 assures you that the EP series is definitely dust tight and hose proof,and can be used outdoors or in wet and dusty environments without the use of additional enclosures. Complete rated output is offered by the result shaft of the unit.
Product Features
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change initial after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Connection Regular with CAGE CLAMP®
Additional features:
Connecting with Connect connectors.
With built-in inverter up to 7,5kW.
EP-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
Due to the unique mixture of optimized worm wheel material with special lubricants and optimized form, this powerful geared motor achieves high levels of effectiveness and torque. The low contour design helps it be suitable for implementing applications e.g. in the meals industry. The housing has no recesses, which simplifies cleaning – an especially important feature for areas with stringent hygiene requirements.
Nominal torque: 50 – 1300 Nm
Rated power: 0.12 – 7.5 kW
Ratio: 3 – 3400
The 800BR contains a wide selection of compact, durable helical gear drives with long life performance features and simplified maintenance. The usage of state of the art helical and worm equipment combinations affords optimum performance fulfilling a multitude of ratio requirements. The 800 BR can be functionally interchangeable with most major manufacturer’s drives.
SPECIFICATIONS
Dual and triple reduction ratios from 8:1 to 900:1,
4 case sizes – 830, 840, 850, 860
All units shipped pre-lubed for your unique installation position with KluberSYNTH UH1 6-460
Available in NEMA C-face flanged and direct input
Projecting and hollow result shafts
Available accessories
Output flange kits
Torque arm kits
Base kits
Output shaft kits
Product Features
Available in nontoxic white (BK) and stainless epoxy finish (SBK)
Available in hollow or projecting output shafts
Double and triple reduction ratios
Flanged or foot mounted
All products adaptable to flooring, sidewall or ceiling mounting
Helical worm geared motor
0,12 – 5,5 kW
4 – 996 Nm / 6 – 316 rpm
Stober MGS S helical worm geared motor
Efficient small right-angle geared electric motor. A favorably priced alternative for the standard jobs anticipated of a right-position drive.
5 gear sizes (S0 to S4).
Engine power 0.12 to 5.5 kW.
Rated torque of 23 to 800 Nm.
Gear ratios from we = 6 to 680.
Backlash smaller than 20 arcmin.
Modular, torsionally stiff , leak-proof design.
Helical worm geared motors offered with:
Solid shaft with keyway.
Hollow shaft with keyway, optional with cover.
Hollow shaft with shrink disk, optional with cover.
Gear device and AC electric motor are directly flange mounted, the pinion is upon the motor shaft. This integrated small design is an essential factor for the high precision and the incredible stiffness of EP geared motors.
For vector-controlled inverter operation usage of an incremental encoder is provided for as regular.
Worm gearboxes and helical worm gearboxes / geared motors (S and SS)
The degree of efficiency in Ever-Power high performance worm gearboxes and helical worm gearboxes is a lot more than 90%. All worm shafts are manufactured from case hardened alloy metal and the flanks are precision floor. The worm wheels are made from special wear-resistant bronze. Helical worm gears are equipped with a helical equipment. Worm gears with shrink disc, torque limiter, and also adjustable backlash styles are also part of our standard item range.
Worm gearboxes and helical worm gearboxes type S and SS are high-Efficiency gearboxes in universal style. The housings are produced from top quality cast iron. The rugget walls and internal ribbing ensure extremely torsional stiff and noise dampening housings. The external ripping provides a rapid heat conducting.
Type S und SS
Technical characteristics:
Optimised size/performance ratio
Designed for permanent operation under rough circumstances
Above average lifespan
Housing produced from high quality grey cast iron with tough walls and internal ribbing
Extreme torsional resistance and low noise
Case hardened worm shafts and worms with precision ground flanks
Worm wheels produced from unique bronze
Superior smooth operation
Space saving angular drive
Helical worm gearboxes equipped with helical gear wheel
Low engine speeds
Options:
Basic mounting, flange installation or universal design
Output shaft available since solid shaft or hollow shaft
Shrink disc, torque limiter,and also adjustable backlash
Second shaft end for fitting encoders or brakes
Torque arm
IEC-adaptor
NEMA version
Free input shaft
ATEX specification according to directive 94/9/EG

Right here is a lot even more info on this subject helical worm gear motor